by Florian Hingelbaum
After you started the Flow you will be asked:
You can choose between clicking in the center or clicking random in and around the center.
For nerdd 🤓:
X = 50% ± random(0-10)%
Y = 50% ± random(0-7)%
2. Mode to Start the Autoclicker
Posts a notification that can be clicked to start the autoclicker after 2 seconds delay.
If the button is released the autoclicker will start after 2 second.
Button-Mode uses by default the camera-button!
If you want to change the button, go into the flow and edit the "Key pressed"-block.
Clicking will be stopped if you tap somewhere on the screen.
Process/Flow can be stopped through a (second) notification, so that you don't have to stop it through the automate app.
Added new mode to start the autoclicker:
You will be asked which mode to use, when you start the flow
Added one second delay to button mode to prevent random clicks on screen.
Added a decision for randomness.
Setted delay of both modes to 2sec, because the other delay for notification-mode had too much blocks for non-premium users.
Disabled parallel launches.
Forgot to disable it when testing something.
Rate and review within the app in the Community section.